Trainee Train Driver Assessments; Error Checking Tests

TRAINEE TRAIN DRIVER ASSESSMENTS – HOW TO PASS ERROR CHECKING TESTS

Thinking about becoming a trainee train driver?
Do you have what it takes to pass the trainee train driver assessments?

As part of the train driver selection process, you will be expected to pass ample of tests. These tests are specifically designed, and each one serve a particular purpose.

TRAINEE TRAIN DRIVER ASSESSMENTS – SKILLS AND COMPETENCIES

As I mentioned previously, in order to become a train driver, you will need to demonstrate a particular set of skills and attributes which are required for train driver positions. You will need to pass the challenging process of trainee train driver assessments.

The following is a list of some of the KEY skills and qualities you will need to possess if you are thinking about a career as a train driver.

All of the above skills form the CORE COMPETENCIES of the trainee train driver assessments, and thus it is imperative that you are able to clearly demonstrate these skills in a professional and effective manner.

HOW WILL I BE ASSESSED?

Becoming a trainee train driver is a long-winded, competitive and demanding process. It is a challenging role that requires only the best of the best, therefore making it hard for people to obtain a
career as a train driver.

However, with the right amount of practice, perseverance and preparation, you could improve your chances of obtaining this career.

Firstly, you need to pay huge attention to the importance of the trainee train driver assessments. Many people overlook the importance of these assessments, but they do play a huge role in whether or not you are successful.

WHAT ARE ERROR CHECKING TESTS?

During the trainee train driver assessments, you will be given a test that assesses many of the skills that I have stated previously.

The Error Checking Test is an assessment that focuses specifically on assessing your concentration and attention to detail.

Basically, you will be given an Error Reference Chart which you need to pay close attention to. From this, you will be given a diagram which will require you to check the order and determine whether an error is present.

A BREAKDOWN OF TRAINEE TRAIN DRIVER ASSESSMENTS – ERROR CHECKING TESTS

Below I have broken down the assessment, just to give you some indication as to what the test will look like.

For the purpose of this test, you should remember that your ACTUAL assessment will not look exactly like this, but it is a great way for you to become familiar with the assessment, and improve the required skills needed to pass the test.

Here is a detailed breakdown of your assessment:

You will be given a set of diagrams for which you need to find the errors, using the Error Code Chart provided.

The Error Code Chart are the codes that you will need to use to answer all of the questions.

The Error Code Chart will remain the same throughout the test, and is shown below:

You will then be given 5 questions based on an Error Reference Chart. This will need to be used and remembered to determine which errors the bicycles have. The bicycles may have one or more errors. You will be able to work out the errors based on the reference codes and whether they are the same. If the bicycle does not have the same reference code, then there is an error.

The Error Reference Chart is formulated below:

Using the Error Reference Chart, you must place the correct error code for each question. For Each Reference Chart, it will contain 5 questions. You will need to work out where the errors lie in the diagram.

Using the above Error Reference Chart, and using the Error Codes, find the error in the following diagram.

ANSWER FOR SAMPLE QUESTION

For Check 1, using the order for checking, you need to check the Rear Tyre. Using the Reference Chart, the Rear Tyre is referenced ‘3’, whereas in the question it is referenced ‘2’. This shows an error, because the references do not match. Therefore, you would need to write RT in the Check 1 box.

For Check 2, using the order for checking, you would need to check the Brake Pads. Using the Reference Chart, the Brake Pads are referenced ‘N’; in the question, the Brake Pads are also referenced ‘N’, therefore shows no error. In order to mark no error in the box’, simply put a line through the box.

For Check 3, using the order for checking, you would need to check the Lights. Using the Reference Chart, the Lights are referenced with the power ‘1-3’; in the question the Lights are only powered to ‘2’. This shows an error, because the references do not match. Therefore, you would to write L in the Check 3 box.

For Check 4, using the order for checking, you would need to check the Front Tyre. Using the Reference Chart, the Front Tyre is referenced ‘4;’ in the question, the Front Tyre is also referenced ‘4’. This shows no error, and you should draw a line through the box, indicating that there is no error.

ERROR CHECKING TEST – PRACTICE QUESTION

The above Chart is a reminder of the Error Codes that you will need to insert into the Error Report for each error you find.

Using the Error Reference Chart below, answer the questions based on the information found in this chart.

For the next 2 questions, use the above Error Reference Chart to determine which errors the bicycle have. If the bicycle does not have the same reference, then there is an error.

Only enter a code if there is an error present! If an error is not present, draw a line through the box.

Question 1

Question 2

ANSWERS TO PRACTICE QUESTIONS

Question 1

You have to check the rear tyre first. Does this match the reference chart? Yes it does, therefore there is no error. So put a line through Check 1.
You have to check the brake pads next. Does this match the reference chart? No it doesn’t, therefore there is an error. So put BP in Check 2.
You next have to check the lights. Does this match the reference chart? No it doesn’t, therefore there is an error. So put L in Check 3.
Finally, you have to check the Front Tyre. Does this match the reference chart? Yes it does, therefore there is no error. So put a line through Check 4.

Question 2

You have to check the brake pads first. Does this match the reference chart? Yes it does, therefore there is no error. So put a line through Check 1.
You have to check the rear tyre next. Does this match the reference chart? Yes it does, therefore there is no error. So put a line through Check 2.
You next have to check the lights. Does this match the reference chart? Yes it does, therefore there is no error. So put a line through Check 3.
Finally, you have to check the Front Tyre. Does this match the reference chart? No it doesn’t, therefore there is an error. So put FT in Check 4.

FURTHER RESOURCES

Here at How2become, we have a range of Train Driver products that can help you on your pursuit to becoming a trainee train driver.

For more information on becoming a train driver and the trainee train driver assessments, another great resource for you to look at is the TrainDriver.Org website.

Check out more sample error checking tests.